Pentax 430RS, 330RS manual Installing the software, E05KB33533e.qk 6/6/02 428 PM Page 88 1,1

Set the included CD-ROM(S-SW5) in the CD-ROM drive.

e05KB335_33e.qk 6/6/02 4:28 PM Page 88 (1,1)

Installing the software

The procedures for installing the necessary software are explained.

Caution • The installation procedure varies depending on the version of Windows (98/98SE/Me/2000). Before starting installa- tion, check which version of Windows you have on your PC. If you are using Windows XP, see “Installing the USB Driver (Windows XP)” (p.95) for installation instructions.

•If you are using Windows 2000 or Windows XP (Professional), log in by the administrator before starting installation. Refer to your PC’s operation manual for instructions on how to log in.

•Either “430RS” or “330RS” will be displayed in the installa- tion screen area where “xxxxx” is displayed.

Installing the USB driver (Windows 98/98SE/Me/2000)

zTurn on your PC.

x

Playback/Erasing	c Turn the camera off, and connect the PC and camera
	using an USB cable.

vTurn the camera on.

The PC recognizes the camera and the [Add New Hardware Wizard] screen is displayed.

If you are using Windows 98/98SE, follow the procedure below to install the software. For Windows Me, see p.91, and for Windows 2000, see p.93.

●Windows 98/98SE

bClick [Next].

nSelect [Search for the best driver for your device (Recommended)], and then click [Next].

mSelect [Specify a loca- tion], and then click [Browse].

If any other item has been selected, click the check box to unselect it.

,Specify the [Win] folder in the CD-ROM drive and click [OK].

If you click the [+] symbol, the folder will open and dis- play the files inside.

Playback/Erasing

88 89