103
Playback/Erasing
102
Playback/Erasing

Installing the software

The procedures for installing the necessary software are
explained.

Installing the USB driver (Only for Mac OS 8.6)

zTurn on your Macintosh.
xSet the included CD-ROM (S-SW5) in the CD-ROM drive
of your Macintosh.
cCopy the following 2 files to the [Extensions] folder
within the System folder.
PENTAX-USB Storage Driver
PENTAX-USB Storage Shim (E)
vRestart your Macintosh.
For MacOS 9.x or later, there is no need to install the USB driver.
Installing ACDSeeTM
When installing ACDSeeTM, recorded images can be viewed on
your Macintosh.
zTurn on your Macintosh.
xSet the included CD-ROM (S-SW5) in the CD-ROM drive
of your Macintosh.
cDouble click your language choice.
You can choose the language from the following:English,
French, German, Spanish, Italian and Japanese.
vFollow the on-screen guidance and enter the registration
information and proceed with the installation.
memo
Viewing Images with Macintosh
By using the provided USB cable (I-USB6) or card reader and
image-browser software, you can transfer images recorded with
the camera to a PC and edit them or print them out.
This section explains how to view images on a PC using the pro-
vided USB driver and software.

About the included software

The included CD-ROM (S-SW5) contains the following software:
- USB driver
- Image viewing software (ACDSee™)

System environment

OS: Mac OS 8.6 or later (QuickTime 4.0 or later required)
CPU: Power PC 266MHz or higher
Memory: 8MB or more
Hard disk space: 6MB or more
Standard equipped USB port
To view movie pictures on your Macintosh, QuickTime 4.0 or later
pre-installed on system is required.
When you connect the camera to your PC, you are recom-
mended to use the AC adapter.If the battery power runs out
while image data is being transferred, the data may be lost.
Caution
memo

e05KB335_33e.qk 6/6/02 4:28 PM Page 102 (1,1)