VIVOTEK

IMPORTANT:

For a RAID volume configuration, it is recommended you use hard drives of the same model featuring the same capacity and rotation speed, even running the same version of firmware.

Hardware Installation

SATA hard disk(s) are user-supplied. The network video recorder can readily accommodate most of the off-the-shelf SATA hard drives.

1.Use a flat-blade screwdriver to unlock the rotary bezel lock. Open the drive bay bezel by pull- ing the lever on it.

Bezel Lock

Bezel Lever

2.Install your hard disk to the drive bay. Gently put the hard disk into drive bay with its label side facing up and the connector side towards the inside of the chassis. Push the hard disk in. Stop pushing it when you feel the contact resistance.

12 - User's Manual

Page 12
Image 12
Vivotek ND8301 user manual Hardware Installation