
VIVOTEK
PTZ Mouse Control
The "Mount type" setting also determines the display modes available to your fisheye cameras. Please refer to fisheye camera's User Manual for more information.
A highly versatile mouse control is implemented with fisheye cameras. The same control takes effect on a browser management session, on the LiveClient utility, and even on a video playback screen. See the drawing below for how it works.
You can click and hold down the left mouse button to quickly swipe through the field of view, change the view angle, or use the mouse wheel to zoom in/out on a region of interest. However, the PTZ mouse control is only available in the "R" (Regional) mode. In the Panoramic mode, you can only scroll horizontally across the 180º or 360º panoramic view.
1O3R (Original & Regional) Mode Screen Control
|
| Zoom Out |
Zoom In |
| |
|
|
|
Click to bring into center of view
1 | Interactive |
| regional FOV indicators |
3 | 2 |
| Current screen selection |
Pan or tilt
Click, hold down the button, and drag
NOTE:
The various display modes require the support of D3D technologies by your display card. Most
The onscreen mouse control is very agile. Therefore, use the PTZ panel for more delicate moves in a field of view. Pan and Patrol moves are also supported if you have configured preset PTZ positions in the camera's firmware. Note that the Pan move takes place in the Panoramic and Regional views, while the Patrol function through preset positions applies only in the Regional views.
56 - User's Manual