VIVOTEK
How to Configure Client Settings
In Client Settings, you can configure Snapshot Settings, Recording Settings, View Settings, General Settings, Joystick Settings, Proxy Settings, and PiP Settings.
Snapshot Settings
Please follow the steps below to configure snapshot settings:
a. Click Configuration > Client Settings > Snapshot Settings on the menu bar to open the Snapshot Settings window.
b. Select a picture format for snapshots (BMP or JPEG). If you select JPEG format, you can adjust the recompression quality (from 1 to 100). Note that a higher value would generate higher picture quality but lower compression rate.
c. Fill in a filename prefix for the snapshots.
d. The default storage path for snapshots is E:\UserData\Snapshot. You can not change target directory.
e
b
c
NOTE:
The recompression quality is only enabled in H.264 streaming. If your stream source is MJPEG, the system will directly save the JPEG image without recompression.
e. If you check Generate a file name automatically, NVR will directly save snapshots with the following filename format to the storage folder.
Snapshot_20100125_173015_01.jpg
|
|
|
|
|
|
|
|
|
|
File name prefix Date and time | Picture format | |||
| (YYYYMMDD_hhmmss) | |||
|
|
| Serial number of snapshots | |
User's Manual - 125
