Vivotek ND8301 user manual Joystick Settings, Enable Joystick

VIVOTEK

Joystick Settings

This section explains how to remotely control the network cameras using a USB joystick.

Enable Joystick

Connect to the USB plug of the joystick to a USB port on your computer. Supported by the plug-in in the main page (Microsoft’s DirectX), once the plug-in in the main page is loaded, it will automatically detect if there is any joystick on the computer. The joystick should work properly without installing any other driver or software.

Then you can begin to configure the joystick settings of connected devices. Please follow the instruction below to enable joystick settings.

a. Select the target device from the hierarchical management tree.

b. Click Configuration > Client Settings > Joystick Settings on the menu bar to open the Joystick Settings window. If your joystick is working properly, it will be displayed on the drop-down list.

c. Select the joystick you want to configure. Check Enable Joystick, then click Configure Buttons to open Buttons configuration window.

b

a

c

User's Manual - 139