VIVOTEK
Repeat Frequency: Weekly Setting (Periods in a week)
To set up Weekly (Periods in a week) repeat frequency, please configure the following items: Time segments within a week, applicable period of time, and repeat time interval.
Weekly timeline control bar
Daily timeline control bar (24hr)
Set up time segments within a week
Time segments within a week
*You can drag more than one time segment per week.
Applicable period of time
Repeat time interval
You can specify several time segments within a week. The weekly timeline contol bar represents the 7 days of a week, and the daily timeline control bar represents the 24 hours in a day. The daily timeline control bar is only valid when one of the days on the weekly timeline control bar has been selected.
There are two ways to set up time segments: one is to clicking and holding down the left mouse button to draw the timeline control bars; the other is to fill in the precise start and end time value in the corresponding fields.
Add time segments: Choose either step 1 or step 2 to set up
1.Use the mouse to drag the timeline bars:
a.Click on a day on the weekly timeline control bar. The selected bar will turn green.
b.
c.The corresponding time segment will also appear in the Start Time and End Time fields. Click Add, then the red timeline bars representing new time segments will appear as shown below. You can drag multiple time segments within a day and a week.
In the following illustration, the yellow arrows show the dragging direction of the mouse. You can drag from leftato right or the opposite.
b
c
User's Manual - 101
