VIVOTEK
Network Deployment
1.Connect the supplied power adapter to a power outlet.
2.Connect network cameras to the NVR’s LAN ports.
3.If you want to access NVR over the Internet, connect the NVR to the Internet via the WAN port. A web console can be established from a remote PC by keying http://<public IP>:3454 in a browser’s URL address field. However, port forwarding on the router for the TCP port will be necessary.
4.Push the power button to run the NVR.
Clients
Internet
Switch |
| |
Default Fixed IP: | Wireless AP / Router | |
| ||
192.168.1.10 | Default: DHCP | |
LAN | ||
WAN |
NOTE:
The LAN and WAN ports can be configured into the same or different subnets.
You may also connect cameras through the WAN port. If you have cameras connected via the WAN port, make sure the WAN port and the cameras connected through it acquire static IP addresses even when the WAN port is connected to router or AP. If not, the cameras detected
through the WAN port will use the default IPs, e.g., 169.254.xx.xx, and the LiveClient software will not be able to detect their presence.
User's Manual - 15
