Pentax 57233 manual Wireless flash control P-TTL flash mode

122

USING EXTERNAL FLASH

Wireless flash control (P-TTL flash mode)

When the AF360FGZ is used for wireless flash, the following process is executed between the built-in flash and AF360FGZ before the flash is fired.

1.Press the shutter release button completely.

2.The built-in flash discharges a pre-flash (the camera’s flash mode is transmitted).

3.The external flash unit discharges a pre-flash (the subject’s lighting condition is checked).

4.The external flash unit discharges a pre-flash (the required flash output is transmitted to the external flash).

If HS (high-speed sync) has also been set, the built-in flash will discharge another pre-flash to transmit the flash duration time.

5.The AF360FGZ flash unit discharges the flash.

✍MEMO

•You can select how the built-in flash is to be used: either as an information controller for the external flash, or as a flash to affect the exposure using the custom function number [CF8]. See pages 134 and 139.

Channel control

•For wireless control, channel (e.g. CH1) for the AF360FGZ must be set on the camera. Attach the AF360FGZ to the camera, turning on the camera and pressing the shutter release button halfway down to set channel.

•The present channel is displayed for about 10 seconds when

flash mode or is set.