Pentax 57233 manual CF6 Superimposing the focus points

[CF6] Superimposing the focus points

1Superimposes the focus points

2Disables the superimpose function

[CF7] Enabling shutter release before the built-in flash is fully charged

1Disables shutter release until the flash is ready

2Enables shutter release before the flash is charged

[CF8] Using the built-in flash as a wireless control for the AF360FGZ

1Discharges the built-in flash to adjust the exposure

2Built-in flash controls the AF360FGZ

[CF9] Setting the flash pop-up button’s function during wireless operation with the AF360FGZ

1Disables the built-in flash

2Discharges the built-in flash once for a test

3Discharges the built-in flash consecutively for modeling

[CF10] Setting the film rewind method

1Automatically rewinds the film at the end of the roll

2Disables automatic film rewind

*To rewind the film, press the mid-roll rewind button.

[CF11] Setting the status of the end of the film when rewound

1Rolls up the film completely

2Leaves the end of the film unwound

[CF12] Setting the self-timer delay time

1Self-timer delay of 12 sec.

2Self-timer delay of 2 sec. with mirror lock-up

[CF13] Setting the shutter release delay time with the remote control

1Picture taken after 3 sec.

2Picture taken immediately

[CF14] Setting auto focusing during remote control operation

1Auto focusing not used

2Auto focusing used

[CF15] Setting the LCD panel illumination

1Illuminated when the main/preview switch is set to preview

2Illuminated automatically in low light condition

3Not illuminated

[CF16] Setting the mode dial illumination

1Illuminates

2Does not illuminate

[CF17] Enabling shutter release with the aperture ring

set to other than the position

1Disables shutter release if the aperture ring is not

set to the position

2Enables shutter release