![](/images/new-backgrounds/1291653/291653245x1.webp)
Wireless Flash (AF360FGZ Only)
With the AF360FGZ, you can discharge a flash without having a cord connection between the camera and flash unit. The high- speed sync mode can also be used with wireless flash. See page 120.
1.Place the flash unit at the desired location.
2.Set the flash unit’s power switch to [WIRELESS]
3.Set the flash unit’s sync mode switch to S (Slave).
4.Press the flash
be used.
5. Press the flash mode button until
is displayed.
6.Confirm that both the
7.Focus on the subject and take the picture.
✍MEMO
•When the flash is ready (fully charged), the will light in the viewfinder when the shutter release button is pressed halfway down.
•Read the operating manual of the flash unit for more details.
•The AF360FGZ can be attached directly to the camera hot shoe and used instead of the
121
BASIC OPERATION | (PREPARATION) |
BASIC OPERATION | (SHOOTING) |
ADVANCED OPERATIONS |
|
OTHERS |
|