120

USING EXTERNAL FLASH

Using wireless High-speed sync flash with the AF360FGZ

1.Place the flash unit at the desired location.

2.Set the flash unit’s power switch to [WIRELESS]

3.Set the flash unit’s sync mode switch to HS (high-speed sync.).

4.Set the wireless mode switch to S (Slave).

5.Press the flash pop-up button to enable the built-in flash to be used.

6. Press the flash mode button until

is displayed.

7.Confirm that both the built-in flash and external flash unit are fully charged.

8.Focus on the subject and take the picture.

MEMO

When the built-in flash is ready (fully charged), the will light in the viewfinder when the shutter release button is pressed halfway down.

The high-speed sync is only available when the shutter speed is faster than 1/125 sec.

Read the operating manual of the flash unit for more details.

Page 122
Image 122
Pentax 57233 manual 120