Pentax K-50 To select a sensitivity value, To set the level of noise reduction, Sensitivity value

3Press the 4button.

If you select [Auto], [Low], [Medium], [High] or [Off], proceed to Step 7.

4Use the four-way controller (23) to select [Setting], and press the four-way controller (5).

The screen to set the noise reduction level according to the ISO sensitivity appears.

5
	Use the four-way controller (23)
			HighHigh--ISOISO NRNR	1 2
	to select a sensitivity value, and
			100100
	use the four-way controller (45)		200200
			400400
	to set the level of noise reduction
			800800
	which is applied to the selected		16001600
			32003200
	sensitivity value.
			64006400
	The sensitivity values displayed vary		MENU	ResetReset
	according to the [1. EV Steps] and
	[2. Sensitivity Steps] settings made in the [ACustom Setting 1] menu.
	Available operations
	Rear e-dial (S)	Switches between [High-ISO NR 1] and [High-ISO
		NR 2].
	dbutton	Resets the set value to the default setting.

6Press the 3button.

The screen that was displayed in Step 2 appears again.

7Press the 3button twice.

The camera is ready to take a picture.

99

4 ShootingFunctions