Pentax K-50 specifications Setting the Video Output Format, 203, Turn the AV device and camera on

203

4Turn the AV device and camera on.

The camera turns on in video mode, and the camera information is displayed on the screen of the connected AV device.

• You cannot adjust the volume on the camera while the camera is connected to an AV device. Adjust the volume on the AV device.

•Movies are played back with monaural sound.

•Images are output at normal resolution regardless of the resolution supported by the AV device. To output HD video, transfer to and play back on a computer.

Setting the Video Output Format

When the hometown is set at the time of initial setting (p.58), the video output format is set in accordance with that region. Depending on the country or region, images may fail to be played back with the set video output format. If this happens, change the setting.

1Select [Interface Options] in the [RSet-up 2] menu, and press the four-way controller (5).

The [Interface Options] screen appears.

2Use the four-way controller (23) to select [Video Out], and press the four-way controller (5).

3Use the four-way controller (23) to select [NTSC] or [PAL], and press the 4button.

4Press the 3button twice.

The screen that was displayed before selecting the menu item appears again.

The video output format differs depending on the region. When you set [Time Setting] in the World Time setting (p.209) to X (Destination), the video output setting changes to the video output format for that city. Refer to “List of World Time Cities” (p.211) for cities that can be selected as a hometown or destination.

6

Playback Functions and Image Editing