Pentax K-50 specifications Using the Built-in Flash, Setting the Flash Mode

68Using the Built-in Flash

3 BasicOperations

Use a flash to take pictures in low light or backlit conditions.

The built-in flash is optimum for a subject at a distance from approx. 0.7 m to 5 m. Vignetting (darkening of the corners of the image due to a lack of light) may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the lens being used and the sensitivity setting (p.244)).

• When using the built-in flash, remove the lens hood before shooting. Vignetting may occur depending on the lens being used and the shooting conditions. Refer to “Lens and Built-in Flash” (p.263) for details.

•The built-in flash always fully discharges when using a lens without an s (Auto) position.

For details on the built-in flash and instructions on how to take pictures with an external flash, refer to “Using the Flash” (p.241).

Setting the Flash Mode

	Flash Mode	Function
C	Auto Flash	Automatically measures the ambient light and
	Discharge	determines whether to use the flash.
i	Auto Flash+	Discharges a pre-flash for red-eye reduction before
	Red-eye Reduction	the automatic flash.
E	Flash On	Discharges the flash for each picture.
F	Flash On+	Discharges a pre-flash for red-eye reduction before
	Red-eye Reduction	the main flash.
		Sets to a slow shutter speed depending on the
G Slow-speed Sync		brightness. When using this to shoot a portrait with
		the sunset in the background, both the person and
		the background are captured beautifully. (p.242)
H	Slow-speed Sync+	Discharges a pre-flash for red-eye reduction before
	Red-eye	the main flash is discharged with Slow-speed Sync.
I Trailing Curtain		Discharges the flash immediately before closing the
		shutter. Captures moving objects as if they are
k Sync
		leaving a light trail behind them.
r Wireless Mode		You can synchronize an optional external flash
		without using a sync cord. (p.248)