Pentax K-50 229, Transferring Selected Images, Screen to select the unit of transfer appears

• When an Eye-Fi card is used, a new folder is created for every 100 images saved.

•Auto Power Off does not function when images are being transferred.

•When transferring a large number of images, use the optional AC adapter kit or install a fully charged battery. If the internal temperature of the camera becomes high during transferring images, the camera may be turned off automatically to protect the camera circuitry. In such a case, turn on the camera again after a while, and data transfer will resume.

•Select [Communication Info] in Step 2 on p.228 to check the firmware version of the Eye-Fi card.

Transferring Selected Images

When [SELECT] is set in Step 3 on p.228, only the selected images are transferred.

1Press the four-way controller (3) in the single image display of playback mode.

The playback mode palette appears.

2Use the four-way controller (2345) to select N(Eye-Fi Image Transfer), and press the 4button.

The screen to select the unit of transfer appears.

3Use the four-way controller (23) to select the unit of transfer, and press the 4button.

	Enables selecting individual images (in one folder, up to
Select image(s)	100 images).
	• For images taken with [File Format] set to [RAW+],
	JPEG and RAW files saved are counted as one image,
	and both files are transferred.
	Transfers all of the images stored in the selected folder.
Select a folder	• Up to 100 images that can be transferred from the
	selected folder are transferred.

The folder selection screen appears.

229

7

Changing Additional

Settings