Pentax K-50 162, Use the four-way controller 2345 to select a filter, Shooting Settings

162

1Press the Mbutton in standby mode.

The control panel appears.

2Use the four-way controller (2345) to select [Digital Filter], and press the 4button.

The Digital Filter setting screen appears.

The last image taken is displayed in the background.

5

3Use the four-way controller (2345) to select a filter.

You can check the selected filter effect with the background image.

Proceed to Step 7 if you do not need to change the parameters.

ToyToy CameraCamera

INFO ParameterParameter AdjAdj..
MENU CancelCancel	CheckCheck	OK OKOK

Shooting Settings

Available operations

Mbutton	Displays the screen to adjust the parameters.
m button	Saves the background image (only when the data is
	available).

V/Ybutton Uses Digital Preview to preview the background image with the filter effect applied (only when shooting with the viewfinder).

4Press the Mbutton.

The screen to adjust the parameters appears.

5
	Use the four-way controller (23)
			Shading Level
	to select a parameter, and use
	the four-way controller (45) to
	adjust the value.
	Press the dbutton to reset the
	adjustment value to the default setting.	MENU Cancel	Check OK OK

6Press the 4button.

The screen that was displayed in Step 3 appears again.