Inserting/Removing the Battery

• Do not open the battery cover or remove the battery while the power is on.

• Insert the battery correctly. If the battery is inserted incorrectly, it may not be removed. Wipe the electrodes of the battery with a soft dry cloth before inserting.

• Be careful as the camera or battery may become hot when the camera is used continuously for a long period of time.

• Remove the battery when you will not use the camera for a long while. The battery may leak and damage the camera if left installed during prolonged periods of non-use. If the removed battery will not be used for six months or longer, charge the battery for about 30 minutes before storing it. Be sure to recharge the battery every six to twelve months.

• Store the battery in a location where the temperature will remain below room temperature. Avoid locations with high temperatures.

• The date and time may be reset if you leave the battery out of the camera for a long period of time. If this occurs, follow the procedure described in “Setting the Date and Time” (p.60) to set the current date and time.

1 Slide the battery cover unlock

 

switch in the direction of the

2

arrow (1), and open the battery

 

cover (2).

 

1

2With the 2 mark facing towards

outside of the camera, push the battery in until it locks into place.

To remove the battery, push the battery

 

lock switch in the direction of the arrow

 

(3).

3

 

47

2 GettingStarted

Page 48 Page 50
Page 49
Image 49
Pentax K-50 specifications Inserting/Removing the Battery
Page 48 Page 50
Top Page Image Contents