Setting the Initial Menu Tab to be Displayed

Set the initial menu tab displayed on the monitor when the 3button is pressed.

1Select [19. Save Menu Location] in the [ACustom Setting 3] menu, and press the four-way controller (5).

The [19. Save Menu Location] screen appears.

2 Use the four-way controller (23) to select [Reset Menu Location] or [Save Menu Location], and press the 4button.

 

The [ARec. Mode 1] menu ([C Movie 1] menu in

Reset Menu Location

C mode, and [Q Playback 1] menu in playback

 

mode) is always displayed first. (default setting)

 

 

Save Menu Location

The menu tab last selected is displayed first.

 

 

3Press the 3button.

The screen that was displayed before selecting the menu item appears again.

Correcting Defective Pixels in the CMOS Sensor (Pixel Mapping)

Pixel Mapping is a function for mapping out and correcting defective pixels in the CMOS sensor.

Attach a proper lens to the camera before using Pixel Mapping.

1Select [Pixel Mapping] in the [RSet-up 4] menu, and press the four-way controller (5).

The [Pixel Mapping] screen appears.

2Press the four-way controller (2) to select [Pixel Mapping], and press the 4button.

Defective pixels are mapped out and corrected, and the screen that was displayed before selecting the menu item appears again.

• It takes about 30 seconds to map out and correct the defective pixels.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Install a fully charged battery, or use the optional AC adapter kit.

215

7

Changing Additional

Settings

Page 217
Image 217
Pentax K-50 specifications 215, Setting the Initial Menu Tab to be Displayed, Save Menu Location screen appears