Pentax MMK-AP0181H Installation space, Pipe connecting position, Front view, Bottom view

Installation space

Reserve space required to install the indoor unit and for service work.

Keep 300mm or more for clearance between top plate of the indoor unit and the ceiling surface.

300 or more

300 or more 300 or more

The transport brackets are provided. Following to the table, remove the brackets according to direction of pipe. (Left, right, center) (For AP0071H to AP0181H, (left) and (right) transport brackets only are provided.)

Pipe side piping	Parts to be removed
Right side piping	Remove transport bracket (right) only.
Rear side piping
Left side piping	Remove all transport brackets.

REQUIREMENT

After removing of the transport brackets, do not apply force on the lower cabinet. It is to prevent deformation and breakage.

Pipe connecting position

<Front view>

• Remove the installation plate.

Installation plate

Transport bracket (Left)

Transport bracket (Center)

Transport bracket (Right)

(Including installation plate)

210

Top end of installation plate 77 Installation plate (Accessory)

24
Liquid side
	Gas	368
	side
50	75	76

60Left and

Drain pipe	110	right side piping
		(Knockout hole)

Refrigerant pipe connecting port liquid side B

Refrigerant pipe connecting port gas side A

Ø20

380

450	Drain pipe
480	connecting port

<Bottom view>

Shipping from factory (Left side piping)

20

Gas pipe 440

Liquid pipe 540

Drain pipe 560

Model MMK-	A	B
AP0071H to AP0121H	Ø9.5	Ø6.4
AP0151H, AP0181H	Ø12.7	Ø6.4
AP0241H	Ø15.9	Ø9.5

4