Manuals / Perfectone Net Ware / Communications / Telephone

Perfectone Net Ware IP 300 manual Telnet Configuration

Models: IP 300

1 53

Download 53 pages 10.02 Kb

Page 33

IP 300 User Manual

C. Telnet Configuration

On the PC connecting with the phone or on the same segment with the phone, choose Start>Run, and then type telnet 192.168.1.100 into Run field in popuping Run dialog. Or input telnet 192.168.1.100 in the DOS window. Then the following information will be displayed.

IP 300 V1.38 settings

Password :

Then please type password. With debug is set as 0[disable], if type ordinary password

(default one is 1234), after Retun, you will see

Password : ****

P:\>

If you type super password, then you will see:

Password : ********

P:\>

Above information indicates that IP phone is under setting mode, Then you can set the IP 300 IP phone by using the telnet commands.

IP 300	Telnet Commands Explanation
IP 300 Telnet Commands
Command		Function
?		Supply command name and parameters
get		Display basic parameters of the IP 300 IP phone
set		Set parameters of the IP 300 IP phone

33

Image 33

Perfectone Net Ware IP 300 manual Telnet Configuration

Contents

Page Page Product Description Before Getting StartedFunction Keys of IP 300 IP Phone Introduction Normal State FeaturesHardware SoftwareOperating requirements Standard and ProtocolElectric requirements IP 300 IP Phone supports following standard and protocolSize Power 5 W maxConnecting the Handset and Cables What is the IP Addressing of your network?Page Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page Enter the Local IP address What if your network is using Static IP Addressing ?202.67.240.221 Enter the subnetmask addressMenu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Load designated settings to current position Save current settings to designated positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Detailed description Set iptype Command set Syntax description set keywords valueSet ppppin Set pppidSet ip Set subnetmaskSet service type Set nattraversal Set nataddrSet nattraversal Set serviceidSet phonenumber Set nat ttlSet account Set pinSet registerport Set signalportSet controlport Register ttlJitter sizeX Set rtpportSet localtype Set dtmfNumber. set dddcode Set dialnumberSet iddcode Set iddprefixSet innerline Set dddprefixSet localpreifx Set nonlocalprefixSet fwdnumber Set fwdpoweroffSet fwdalways Set fwdbusySet audioframes Set upgradeaddr Set passwordCommand store Relevant Usage store Command loadRelevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a callSpeed Dialing Receiving a CallStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice