IP 300 User Manual
Jack. Plug the other end of the cable into an appropriate LAN or DSL/Cable router port or a HUB.
3.Power on IP phone: plug the power cord adapter into the Power Jack. Then plug the other end of the power cord adapter into the appropriate wall outlet.
If your LAN or router is using DHCP, after finishing the above 3 steps, the LCD should display
a series of messages ending with: “Ready for Call” within a few seconds.
Note: If you are not sure whether DHCP service should be present, try the following:
Check with your network administrator to find out if the system uses DHCP, or
If your IP Phone is connecting with a router, check to see whether it is
configured to provide DHCP addressing.
If your LAN uses static addressing, “Waiting Logon” will display until you enter the IP Phone’s network settings.
8
