Manuals / Perfectone Net Ware / Communications / Telephone

Perfectone Net Ware IP 300 manual Set serviceid, Set nattraversal

Models: IP 300

1 53

Download 53 pages 10.02 Kb

Page 40

IP 300 User Manual

protocol used according to requirement of system; 5: use this value with

vida private system used; 6: aivgr use this value with aivgr private

system used.

set serviceaddr XXXX

According to protocol used, set IP address or domain name of log in server. With H323 protocol used, set IP address or domain name of gatekeeper; With MGCP protocol used, set IP address or domain name of Call Agent; With SIP protocol used, set IP address or domain name of SIP Proxy Server; With Net2phone protocol used, set IP address or domain name of designated server.

Note With H323 protocol used, if value of set service is 0, then set serviceaddr

command can be used to set IP address of gateway.

set serviceid XXXXX

Set service ID according to required by service system.

set nattraversal X

Set use proxy or not. X ranged from 0 through 6: 0: do not use proxy. When the log in server and IP phone in the same LAN, or the log in system supports the IP phone working behind the LAN; 1: Use proxy. When the login system does not support IP phone working behind the LAN, please use this value to search public IP address of the NAT device. With this item selected, please make port mapping on NAT device; 2: With Citron private protocol used, use this value to fit into the GnuGK system transferring the voice and signal by router; 3: use this

40

Image 40

Perfectone Net Ware IP 300 manual Set serviceid, Set nattraversal

Contents

Page Page Before Getting Started Product DescriptionFeatures Function Keys of IP 300 IP Phone Introduction Normal StateHardware SoftwareStandard and Protocol Operating requirementsElectric requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage Enter setting mode Using the Keypad to Configure the IP phoneWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Save current settings to designated position Load designated settings to current positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet nat ttl Set phonenumberSet account Set pinSet signalport Set registerportSet controlport Register ttlSet rtpport Jitter sizeXSet localtype Set dtmfSet dialnumber Number. set dddcodeSet iddcode Set iddprefixSet dddprefix Set innerlineSet localpreifx Set nonlocalprefixSet fwdpoweroff Set fwdnumberSet fwdalways Set fwdbusySet audioframes Set password Set upgradeaddrCommand store Relevant Usage store Command loadRelevant usage None Command write Relevant Usage load Command exitFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperReceiving a Call Speed DialingStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice