Perfectone Net Ware IP 300 manual Set pppid, Set ppppin, Set ip, Set subnetmask, Set router

IP 300 User Manual

router is configured to use DHCP addressing, the IP phone’s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up; 2: use PPPoE mode. Those ADSL and Cable Modem users please select this item for it is a protocol especially designed for them. With this system, ADSL ISP automatically assigns all the required IP parameters to any device connected to it when the device log on; 3: use modem mode. Those who use IP phone with modem, please set the value as 3.

set pppid XXX

With iptype set as 2, use this command to set ADSL ID; with iptype set as 3, use this command to set Modem ID.

set ppppin XXX

With iptype set as 2, use this command to set ADSL pin; with iptype set as 3, use this command to set Modem pin.

set ip XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set IP address of IP-300 IP

phone.

set subnetmask XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set subnet mask of IP-300 IP

phone.

set router XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set router IP of network with

37