Phone settings | Perfectone Net Ware IP 300 instruction

IP 300 User Manual

normal: Call out in normal way by selecting this item.

faststart: Call out in faststart way by selecting this item.

advanced: Call out in faststart and tunneling way by selecting this item. It is a recommended way with H323 protocol used.

dtmf: Set DTMF signal sending way by selecting control string, inband audio, signal keypad or rfc 2833 from list box.

phone settings:

Fig 3.4 Phone Setting Page

Use dialplan: Set whether use dial plan or use dial number by selecting the corresponding item in drop down list.

disable: Do not use dial plan or dial number by selecting this item.

enable: Use dial plan by selecting this item.

dialnum: Use dial number by selecting this item. With this item selected, please enter the dial prefix into dial number field.

refix: Use 179XX service by selecting this item.

Hotline: Use Hotline function by selecting this item. With this item selected, please enter the hotline number into dial number field.

Note With 179xx service used, please set as follows: fill call prefix into dial

26

Image 26

Perfectone Net Ware IP 300 manual Phone settings

Contents

Page Page Before Getting Started Product Description Hardware FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State Software Electric requirements Standard and ProtocolOperating requirements IP 300 IP Phone supports following standard and protocol Power 5 W max Size What is the IP Addressing of your network? Connecting the Handset and CablesPage What if your network is using Dhcp Addressing? Using the Keypad to Configure the IP phoneEnter setting mode Page What if your network is using Static IP Addressing ? Enter the Local IP address Enter the subnetmask address 202.67.240.221 Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Exit with saving all configurations and restart IP Save current settings to designated positionLoad designated settings to current position Detail description of IP 300 Telnet commands Command ? Will be displayed Command set Syntax description set keywords value Detailed description Set iptype Set ip Set pppidSet ppppin Set subnetmask Set service type Set nataddr Set nattraversal Set serviceid Set nattraversal Set account Set nat ttlSet phonenumber Set pin Set controlport Set signalportSet registerport Register ttl Set localtype Set rtpportJitter sizeX Set dtmf Set iddcode Set dialnumberNumber. set dddcode Set iddprefix Set localpreifx Set dddprefixSet innerline Set nonlocalprefix Set fwdalways Set fwdpoweroffSet fwdnumber Set fwdbusy Set audioframes Command store Set passwordSet upgradeaddr Relevant Usage store Command load Ftp command Syntax description ftp value Relevant Usage load Command exitRelevant usage None Command write Relevant usage ftp To place a call Call another IP 300 IP phone under the same Gatekeeper Storing a Number into Memory Dial Receiving a CallSpeed Dialing Dial a Stored Number Keys Press Press Twice