Protocol settings | Perfectone Net Ware IP 300 guide

IP 300 User Manual

IP address of IP phone here.

dns: With static ip selected in iptype drop down list, please enter IP address of DNS server here.

dns 2: With static ip selected in iptype drop down list, please enter IP address of backup DNS server here.

mac: MAC address is the physical address supplied by the Ethernet NIC. IP 300 phone is shipped from the factory with a unique algorism MAC address printed on the back of the base.

protocol settings

Fig 3 Protocol Setting Page

protocol: Select the protocol used from the list box.

h323: Select this item to use H.323 protocol.

sip: Select this item to use SIP protocol.

mgcp: Select this item to use MGCP protocol.

n2p: Select this item to use Net2phone private protocol.

IAX2:Select this item to IAX2 private protocol .

WP: Select this item to WP Private protocol.

19

Image 19

Perfectone Net Ware IP 300 manual Protocol settings

Contents

Page Page Product Description Before Getting Started Software FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State Hardware IP 300 IP Phone supports following standard and protocol Standard and ProtocolOperating requirements Electric requirements Size Power 5 W max Connecting the Handset and Cables What is the IP Addressing of your network?Page Enter setting mode Using the Keypad to Configure the IP phoneWhat if your network is using Dhcp Addressing? Page Enter the Local IP address What if your network is using Static IP Addressing ? 202.67.240.221 Enter the subnetmask address Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Detail description of IP 300 Telnet commands Command ? Save current settings to designated positionLoad designated settings to current position Exit with saving all configurations and restart IP Will be displayed Detailed description Set iptype Command set Syntax description set keywords value Set subnetmask Set pppidSet ppppin Set ip Set service type Set nattraversal Set nataddr Set nattraversal Set serviceid Set pin Set nat ttlSet phonenumber Set account Register ttl Set signalportSet registerport Set controlport Set dtmf Set rtpportJitter sizeX Set localtype Set iddprefix Set dialnumberNumber. set dddcode Set iddcode Set nonlocalprefix Set dddprefixSet innerline Set localpreifx Set fwdbusy Set fwdpoweroffSet fwdnumber Set fwdalways Set audioframes Relevant Usage store Command load Set passwordSet upgradeaddr Command store Relevant usage None Command write Relevant Usage load Command exitFtp command Syntax description ftp value Relevant usage ftp Call another IP 300 IP phone under the same Gatekeeper To place a call Dial a Stored Number Receiving a CallSpeed Dialing Storing a Number into Memory Dial Keys Press Press Twice