Manuals / Perfectone Net Ware / Communications / Telephone

Perfectone Net Ware manual Function Keys of IP 300 IP Phone Introduction Normal State, Features

Models: IP 300

1 53

Download 53 pages 10.02 Kb

Page 4

IP 300 User Manual

Function Keys of IP 300 IP Phone Introduction (Normal State):

Keys	Function
Local IP	With handset hung, press this key to get local IP address of the phone
Missed Call	With handset hung, press this key to review missed number
Subnet Mask	The subnet mask of the IP phone
Router IP	The gateway IP address
Speed Dial	Speed dial
Phone Number	With handset hung, press this key to get phone number
Made Call	With handset hung, press this key to review dialed number
Mem	Save speed dial number
Server IP	The gatekeeper’s IP
Redial	While reviewing, press this key to dial missed, received or dialed number
SPK	Press this key to have a call without lifting the handset
SPK

Vol+	Increase the volumes of handset or speaker; turn over the record backward
Vol+

Vol-	Decrease the volumes of handset or speaker; turn over the record forward

Features

Hardware

Main chip—50MHz

Data Memory—16MB SDRAM

Program Memory—8 MB Flash memory

Ethernet Jack—1/2 10/100M jacks

AC/DC adapter—Input AC 220V Output 7.5V DC, 0.8A

Software

Support major G.7XX and gsm610audio codec Dynamic voice test

DHCP support for LAN or Cable modem PPPoE support for ADSL or Cable modem

Set phone by HTTP web browser (IE6.0) or Telnet

Upgrade by FTP

CNG (Comfort noise generation) Dynamic voice jitter buffer

G.168/165 compliant 16ms echo cancellation

Tone generation and Local DTMF re-generation according with ITU-T

4

Image 4

Perfectone Net Ware manual Function Keys of IP 300 IP Phone Introduction Normal State, Features, Hardware, Software

Contents

Page Page Before Getting Started Product DescriptionFeatures Function Keys of IP 300 IP Phone Introduction Normal StateHardware SoftwareStandard and Protocol Operating requirementsElectric requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage Enter setting mode Using the Keypad to Configure the IP phoneWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Save current settings to designated position Load designated settings to current positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet nat ttl Set phonenumberSet account Set pinSet signalport Set registerportSet controlport Register ttlSet rtpport Jitter sizeXSet localtype Set dtmfSet dialnumber Number. set dddcodeSet iddcode Set iddprefixSet dddprefix Set innerlineSet localpreifx Set nonlocalprefixSet fwdpoweroff Set fwdnumberSet fwdalways Set fwdbusySet audioframes Set password Set upgradeaddrCommand store Relevant Usage store Command loadRelevant usage None Command write Relevant Usage load Command exitFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperReceiving a Call Speed DialingStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice