Set registerport, Set signalport | Perfectone Net Ware IP 300

IP 300 User Manual

card; while local type is set as 2[H2355 account], set password. With MGCP protocol used, please set domain name by this command. With Net2phone system used, set password of Net2phone card by this command.

set registerport XXXX

Set register port. According to used protocol, set as follows: With H323 protocol used, XXXX is ranged from 1024 through 6553; With MGCP protocol used, please set is as 2427; With SIP protocol used, please set it as 5060; With Net2phone protocol used, this port could be any number.

set signalport XXXX

With H323 protocol used, signal port is Q.931 port using TCP protocol.

XXXXis arranged from 1024 through 65535.

With SIP protocol used and proxy is stun, signal port is stun port by stun Server specify or enter stun default port number 3478.

set controlport XXXX

Set control port. With H323 protocol used, this port is H.245 port using TCP protocol. XXXX is ranged from 1024 through 65535.

register ttl :X

With H323 or SIP protocol, IP phone will send a keep-alive registration message to H323 gatekeeper or SIP proxy server every “register ttl” seconds. The minimum value is 10, maximum value is 255. Default is 60.

set rtptos X

Set TOS segment of IP head package in RTP digital follow.

42

Image 42

Perfectone Net Ware IP 300 manual Set registerport, Set signalport, Set controlport, Register ttl, Set rtptos

Contents

Page Page Before Getting Started Product Description Hardware FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State Software Electric requirements Standard and ProtocolOperating requirements IP 300 IP Phone supports following standard and protocol Power 5 W max Size What is the IP Addressing of your network? Connecting the Handset and CablesPage Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP address Enter the subnetmask address 202.67.240.221 Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Exit with saving all configurations and restart IP Save current settings to designated positionLoad designated settings to current position Detail description of IP 300 Telnet commands Command ? Will be displayed Command set Syntax description set keywords value Detailed description Set iptype Set ip Set pppidSet ppppin Set subnetmask Set service type Set nataddr Set nattraversal Set serviceid Set nattraversal Set account Set nat ttlSet phonenumber Set pin Set controlport Set signalportSet registerport Register ttl Set localtype Set rtpportJitter sizeX Set dtmf Set iddcode Set dialnumberNumber. set dddcode Set iddprefix Set localpreifx Set dddprefixSet innerline Set nonlocalprefix Set fwdalways Set fwdpoweroffSet fwdnumber Set fwdbusy Set audioframes Command store Set passwordSet upgradeaddr Relevant Usage store Command load Relevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same Gatekeeper Storing a Number into Memory Dial Receiving a CallSpeed Dialing Dial a Stored Number Keys Press Press Twice