IP 300 User Manual
2. Receiving a Call
IP300 receives incoming calls from other IP Phones using the same service platform. The IP Phone works just like an ordinary phone for incoming calls. When it rings, just lift the handset and begin speaking.
3. Speed Dialing
This feature stores up to ten phone numbers in the IP Phone’s memory locations and retrieves them for Memory Dialing.
Storing a Number into Memory Dial:
1. | In the setting mode, | press the “VOL+” button four times | ||
|
|
|
| |
|
|
|
| |
|
|
| ) | |
|
|
|
| |
| to browse the different settings until reaching “speed dial settings” | |||
|
|
|
|
|
Press “SPK” button.
2. When you see this screen:
+!,
press “Local IP” button to
enter a word (e.g. a name) to denote this memory. Then, press “SPK”
button to input enter this screen:
! ,
3.Again, press “Local IP” button to input the phone number.
4.Press “SPK” button to confirm and input the next number.
5.When having finished the input, press “Redial” button to return to the
|
| ) |
|
|
| ||
speed dial setting screen: |
| press ”Redial” six times until | |||||
|
|
|
|
|
|
| |
into save settings screen. |
|
|
|
|
| ||
. |
|
|
|
| |||
|
|
|
|
|
| ||
|
|
|
| . |
| ||
|
|
|
|
|
| ||
6. Press “SPK” button to input enter this screen | |||||||
/0 |
| ||||||
|
|
|
|
|
|
| |
7.Press “SPK” to reboot the IP phone back to “ready for call” status.
Dial a Stored Number:
1.Lift the handset or press the SPK button to hear the dial tone.
2.Press the
52
