Relevant usage ftp | Perfectone Net Ware IP 300 manual

IP 300 User Manual

Usage: the system connects to the FTP server auto to get the corresponding file and deal with it.

Relevant usage: ftp X

X ranged from 0 through 2:

X-0: Connect to FTP Server to get the file of updating program and save it to the SDRAM of the phone. Then the file can be read by PalmTool. This operation aims at testing.

X-1: Connect to FTP Server to get the file of updating program and update program Flash. This operation aims at updating program.

X-2: Connect to FTP Server to get the file of updating dial rules and update program Flash. This operation aims at updating dial rule.

Note When you use ftp 0 and ftp 1 commands, if the file get from FTP server is too large or the net speed is too slow, then the process will not be seen in telnet window. Please be patient. Using ftp command in telnet to get file spends almost same minutes as getting file using phone. So if nothing is displayed after too long time, it means that ftp is fail.

Note All the Telnet commands of IP-300 IP phone should be written in low case and the password is case sensitive.

50

Image 50

Perfectone Net Ware IP 300 manual Relevant usage ftp

Contents

Page Page Before Getting Started Product Description Hardware FeaturesFunction Keys of IP 300 IP Phone Introduction Normal State Software Electric requirements Standard and ProtocolOperating requirements IP 300 IP Phone supports following standard and protocol Power 5 W max Size What is the IP Addressing of your network? Connecting the Handset and CablesPage What if your network is using Dhcp Addressing? Using the Keypad to Configure the IP phoneEnter setting mode Page What if your network is using Static IP Addressing ? Enter the Local IP address Enter the subnetmask address 202.67.240.221 Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Exit with saving all configurations and restart IP Save current settings to designated positionLoad designated settings to current position Detail description of IP 300 Telnet commands Command ? Will be displayed Command set Syntax description set keywords value Detailed description Set iptype Set ip Set pppidSet ppppin Set subnetmask Set service type Set nataddr Set nattraversal Set serviceid Set nattraversal Set account Set nat ttlSet phonenumber Set pin Set controlport Set signalportSet registerport Register ttl Set localtype Set rtpportJitter sizeX Set dtmf Set iddcode Set dialnumberNumber. set dddcode Set iddprefix Set localpreifx Set dddprefixSet innerline Set nonlocalprefix Set fwdalways Set fwdpoweroffSet fwdnumber Set fwdbusy Set audioframes Command store Set passwordSet upgradeaddr Relevant Usage store Command load Ftp command Syntax description ftp value Relevant Usage load Command exitRelevant usage None Command write Relevant usage ftp To place a call Call another IP 300 IP phone under the same Gatekeeper Storing a Number into Memory Dial Receiving a CallSpeed Dialing Dial a Stored Number Keys Press Press Twice