PGS TC36 AR Vent Pipe Sealant, Insulated Collar Shield, Be USED. see Section Below, Bend Tabs

VENT PIPE SEALANT

Fig. #23

APPROVED

"HIGH TEMP."

SELF-ADHESIVE

ALUMINUM

TAPE

VENT PIPE

INSULATED COLLAR

SHIELD (Included) MUST

BE USED. SEE SECTION

BELOW

VENT PIPE SEALANT

All outer joints of the vent pipe must be sealed with the ap- proved "High Temp." self-adhesive aluminum tape provided. Wrap the tape completely around the joint and press fi rmly in place.

INSULATED COLLAR SHIELD

(Included Pt# TC36.9709)

After sealing the vent pipe an insulating blanket and cover must be installed around the vent pipe, fl ush with the top of the unit and secured by fi tting tabs through slots and bending over tabs 180° as shown in fi g #24. The parts required are included. *NOTE: bending tabs to 90° away from arc bend

Fig. #24 INSULATION

COVER (2 pcs.)

BEND

TABS

18 36ARB2 050505-36