Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

13.3

Care of the 3D glasses

Do not use cleaning chemicals containing alcohol, solvent, surfactant, or wax, benzene, thinner, mosquito repellent or lubricant. Using these chemicals can cause discoloration or cracks.

Do not expose the 3D glasses to direct sunlight, heat, fire or water. This may result in a product malfunction or fire.

Do not drop, bend or apply force to the lenses of the 3D glasses.

Use a clean soft cloth (microfiber or cotton flannel) to clean the lenses to avoid scratching them. Never spray cleaner directly onto the 3D glasses. This may damage the electronics (for Active 3D glasses).

13.4

Watch 3D

To experience the best 3D effect while you watch 3D programmes:

Sit at a distance that is at least three times the width (w) of the TV screen.

Do not sit more than 6m away.

3D switching

The first time a 3D signal is detected, you can set your preference on how to start 3D in the future.

To switch to 3D automatically, select Automatic.

To show a notification first, select Notification only.

To never switch to 3D, select Never.

You can still change this preference in  > Setup > TV settings

>3D > Switch to 3D.

Start 3D

When the TV switches to 3D or when a notification is shown that 3D is available, put on your 3D glasses.

If the TV cannot detect the 3D signal (the 3D signal tag is missing), the 3D programme is shown as a double image on screen. To switch to 3D, adjust the 3D settings and select Side by side or Top / bottom according to the double image positions.

1 - Press .

2 - Select 3D settings > 3D - Side by side or 3D - Top /

bottom, then press OK.

Stop 3D

To stop watching 3D, press , select 3D settings and select 2D. 3D is switched to 2D when you switch to another channel or connected device.

2D to 3D conversion

You can convert any 2D programme to watch it in 3D. 1 - Press .

2 - Select 3D settings > 2D to 3D conversion.

Adjust the 3D depth

1 - Press  and select Setup, then press OK .

2 - Select TV settings > 3D > 3D effect.

3 - Select Off, or On.

4 - Press , repeatedly if necessary, to close the menu.

Switch off 2D to 3D conversion 1 - Press .

2 - Select 3D settings > 2D, then press OK.

13.5

Optimal 3D viewing

For an optimal 3D viewing experience, we recommend that you:

sit at least 3 times the height of the TV screen away from the TV, but no further than 6 meters away.

avoid fluorescent lighting (such as TL lighting or certain energy saving light bulbs which operate on a low frequency) and direct sunlight as they may interfere with the 3D experience.

13.6

Health warning

Watching 3D is not recommended for children under the age of six.

If you or your family have a history of epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing.

47

Page 47
Image 47
Philips 50PUS6809, 58PUK6809, 58PUS6809, 50PUK6809 Care of the 3D glasses, Watch 3D, Optimal 3D viewing, Health warning