13
3D
13.1
What you need
For Active 3D sets
This is an Active 3D TV. On this TV, you can watch 3D programmes and movies in full High Definition resolution with Active 3D.
To watch 3D you need to :
•Tune to a TV channel that broadcasts programmes in 3D.
•Rent a movie in 3D from an online video store with Smart TV.
•Watch a movie in 3D from a 3D
Also, to watch 3D on this TV, you will need one of these types of Philips Active 3D glasses. . .
•PTA507
•PTA508
•PTA509
•PTA517
•PTA518
•PTA519
13.2
The 3D glasses
For Active 3D sets
Overview
1 - On or off switch
2 - Player 1 or player 2 selection
3 - Receiver lens
4 - Battery compartment
When you unpack the 3D glasses, also remove the small plastic foil from the battery compartment that prevents the battery from running empty.
Switch on and off
Switch on
When a 3D programme is shown on screen, press on the 3D glasses and put them on. The glasses need some seconds to adjust to the 3D signal from the 3D transmitter on the TV. At first use, this may take up to 15 seconds.
Battery level
You can check the battery level when you switch on the 3D glasses.
•If the LED light blinks green, you can use the glasses for 4 hours or more.
•If the LED light blinks orange, you can use the glasses for at least 2 hours but less than 4.
•If the LED light blinks red, the battery is almost empty and less than 2 hours of 3D watching remain.
Switch off
To switch off the 3D glasses, press . The LED light blinks red 4 times. When the 3D glasses do not receive 3D signals for 2 minutes, the glasses switch off automatically.
3D transmitter
Make sure the receiver lens in the centre of the glasses can receive the 3D signals. Also, clear objects away from the 3D transmitter on the TV.
1 - 3D transmitter on the TV
2 - 3D receiver on the 3D glasses
You can use these glasses to play
To switch the glasses to watch the Player 1 or Player 2 screen, switch on the glasses and then press the Player 1/2 key.
•If the LED light is orange and lits continuously for 2 seconds, the glasses are set for player 1.
•If the LED light is orange and blinks, the glasses are set for player 2.
For more information, press Keywords and look up Two- player gaming.
Replacing the batteries
To replace the battery of the 3D glasses PTA508, unscrew the small battery lid and replace the battery: type CR2032 (3V). Make sure the + side of the battery is visible. Replace the lid and fix it with the screw.
To replace the battery of the 3D glasses PTA509, PTA519, press the small knob on the battery lid and slide the lid up to open. Replace the battery: type CR2032 (3V). Make sure the + side of the battery is visible. Replace the lid and slide it down until it clicks.
Warning
•Do not ingest battery, chemical burn hazard.
•This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
46
