Philips CCC194, CCC134 owner manual Timer Recording With the VCR Plus+ Programming System cont’d

Timer Recording With the VCR Plus+ Programming System (cont’d) 41

4				5
Press the Number 1 button to record in SP speed or the
Number 2 button to record in SLP speed. Your selection						6
will appear to the right of REC SPEED on the screen, although			EJECT
SP=1 SLP=2 will continue to flash. For details about tape speed,					POWER
see pages 30 and 64. You cannot use the SPEED button at this		4	MENU	STATUS	CLEAR FM
				/EXIT
time.			1	2	3
ONE TIME PROGRAM			4	5	6
PROGRAM	1		7	8	9
CHANNEL	09
			SLEEP/
TIME ON	10:30 PM				ALT.CH
			WAKE UP	0
TIME OFF	11:30 PM
REC SPEED	SLP
SP=1 SLP=2			REC		PAUSE
START DATE	04/19/2001		/OTR		/STILL
				PLAY
	THURSDAY
TO END PRESS EXIT			REW		F.FWD

5

Press the STATUS/EXIT button. PROGRAM WAS COM- PLETED / PLEASE TURN OFF FOR TIMER RECORDING will appear on the screen.

●If there is not a tape in the TV/VCR, PLEASE INSERT CAS- SETTE also appears on the screen.

●If there is a tape without a record tab in the TV/VCR, PLEASE REMOVE CASSETTE also appears on the screen. If this hap- pens, insert a different tape.

STOP

CH.VOL.

	MUTE
CABLE	COMBI		SMART
/DBS			PICTURE
	SPEED	MEMORY VCR PLUS+
F.ADV		SLOW	ENTER
TRACKING		VAR.SLOW
	INDEX		SKIP
		SEARCH

6

Press the POWER button to turn off the TV/VCR power. The Record light will flash slowly if a tape is in the TV/VCR.

If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording starts. The Record light will blink rapidly until you turn off the power for the recording.

Turn off the TV/VCR for the recording. Insert a tape in the TV/VCR. Leave the Cable Box/DBS on (if applicable).

Helpful Hints

•To exit the VCR Plus+ programming system at any time, press the STA- TUS/EXIT button. The display will disappear from the screen.

•To stop a started timer recording, press the STOP/EJECT button on the TV/VCR.