POWER
EJECT
SPEED MEMORY
CABLE
/DBS COMBI SMART
PICTURE
SLOWF.ADV
INDEX SKIP
SLEEP/
WAKE UP
123
456
789
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
ENTER
SEARCH
VAR.SLOW
MENU STATUS
/EXIT FMCLEAR
Index Search 61
This feature allows you to index the starting points of programs
that you have recorded on a tape. Then, you can easily rewind or
fast forward to that point.
Example:
If you are watching program number 4 and you want to fast for-
ward to program number 7, skip three programs.
Pro. 1Pro. 2 Pro.3 Pro. 4Pro. 5 Pro. 6 Pro. 7
CURRENT PLAYBACK PROGRAM
432 1123
INDEX MARK
Beginning of tape End of tape
1
Press the COMBI button, then press the INDEX SEARCH
button to bring up the index search display. There must be
a tape in the TV/VCR.
2
Within 10 seconds, use the Number buttons to enter the
number of programs that you want to skip. Enter a zero
before single-digit numbers. For example, to skip three programs,
press Number buttons 0, 3. If you do not make an entry within 10
seconds, the TV/VCR will exit Index Search mode.
3
Within 10 seconds, press the F.FWD/Bbutton or the
REW(ind)/{button to skip forward or backward. The
TV/VCR will fast forward or rewind to the beginning of the
desired program, then begin playback. (The program numbers
count down on the screen as the searching progresses. TV pro-
gramming will appear during the search.)
• Up to 20 index marks may be
searched.
• This function will not operate during
recording.
• Press the STOP/pbutton to stop the
search.
• An index mark will be made auto-
matically when a recording begins.
• The index mark is not made at a
point at which recording is paused.
• The time gap between index marks
should be greater than 1 minute for
SP recording, 2 minutes for LP record-
ing, and 3 minutes for SLP recording.
Helpful Hints
INDEX SEARCH
00
ENTER INDEX NUMBER
1
2
3