Specifications | Philips CCC194, CCC134 manual

Specifications 65

General

CRT: 13-inch in line gun (CCC134) 19-inch in line gun (CCC194)

Television system: NTSC-M

Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard

Video Heads: Four heads

Tape width: 1/2 inch (12.65 mm) Tape speed

SP: 33.35 mm/sec.

LP: 16.67 mm/sec.

SLP: 11.12 mm/sec.

Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)

Relative Humidity: 10% to 75%

Power requirement: AC 120V, 60Hz

Power consumption: 65W (CCC134) 90W (CCC194)

Sound output: 1W Dimensions:

15-3/4" (H) x 15-3/16" (W) x 14-13/16" (D) 400mm x 386mm x 377mm

19-5/8" (H) x 19-3/8" (W) x 18-11/16" (D) 498mm x 492mm x 474mm

Weight: 24.3 lbs (11.0 kg) (CCC134)

Weight: 44.1 lbs (20.0 kg) (CCC194)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

FM Radio Stations

88.0 ~ 108.0 MHz

Terminals

Antenna In: VHF/UHF 75 ohms unbalanced

Video In: RCA connector

Audio In: RCA connector

Earphone: 3.5 mm CES

Electrical Specifications

Video input level: 0.5~2.0Vp-p

Audio input level: -10dBv

Video S/N ratio

SP: More than 42dBµ

Audio S/N ratio

SP: More than 38dB

(CCC134)

(CCC194)

Designs and specifications are subject to change without notice and without our legal obligation.

Image 65

Philips CCC194, CCC134 owner manual Specifications

Contents

Color TV with built-in VCR For Customer Use Dear Philips product ownerThis bolt of lightning indi- cates uninsulated material Model No Serial No Safety Precautions FeaturesIntroduction Declaration of Conformity Table of Contents Battery Safety Putting Batteries in the Remote ControlUsing the Remote Control TV/VCR Maintenance Hooking Up the TV/VCR Hook up your TV/VCR using one of the connections shownRF coaxial cable Not supplied Rod Antenna Bent pin Hooking Up the TV/VCR cont’dCrooked Pin Straight Pin Cable Plug Press the Menu button. The screen shown below will appear Turning On the TV/VCR Press the Combi button, then press the Menu button Language Selection Wait for the TV/VCR to set up channels Automatic Channel Setup Press the PLAY/o button or the STOP/p button to select Adding/Deleting ChannelsRepeat steps 3-4 to add or delete other channels Programming of the last channel you selected will appear Cable Box users must set the clock manually Setting the ClockManual Clock Setting Setting the Clock cont’d Automatic PBS Channel Selection Setting the Clock cont’d NOW Searching flashes on the TV/VCR screen Wait for the TV/VCR to findTime Manual PBS Channel Selection Wait for the TV/VCR to find the time Use the Number buttons to select your PBS station Daylight-Savings Time Time Zone Find your code Setting the Remote to Operate a Cable Box/DBSFind the brand of your Cable Box/DBS on the lists below Remember the two-digit number beside it Within 30 seconds, press the Number buttons to enter Repeat . If the remote control works your CableTwo-digit code for your Cable Box/DBS. For example, if You have a Zenith Cable Box, press Number buttons 0 Front Panel Rear Panel AC Power CordANTenna Jack Connect your antenna or cable here Remote Control Buttons Remote Control Buttons cont’d Adjusting the Picture Controls Decreased brightness Decrease Increase If you select Status ON, then select Counter only OFF On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status OFF Insert a tape in the TV/VCR PlayingFollow the steps below to play a tape Press the RECord/OTR button once to start recording Power button to turn on the TV/VCR, if necessaryRecording Press the STOP/EJECT but- ton on the TV/VCR to stop the OTR One-Touch Recording Different brands of equipment may operate differently Rerecording Tape Duplication Follow the steps below to prevent accidental recording Defeat Recording Daily Timer Recording Timer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Station Setting Up the VCR Plus+ Programming SystemTV Channels Examine the lists on Setting Up the VCR Plus+ Programming System cont’d PLUS+/ENTER button You have completed the steps on pagesPress the Combi button, then press the VCR Timer Recording With the VCR Plus+ Programming System cont’d Appear on the screen Real-Time Counter Memory TV programming will appear while the tape is rewinding Repeat Play Press the PLAY/ button or the STOP/ button to select B Repeat Play Repeat Play cont’d Forward and Reverse Searching SP/LP/SLP Playback OptionsSuper High Speed Searching LP/SLP Viewing a Still Picture Blue Background SmartLock Example Specific Sub-ratings SmartLock cont’dRatings are defined on Use the Number buttons to enter your old access code To change the access code, follow these steps Rating Explanations Press the Combi button, then press the SLEEP/WAKE UP button Sleep Timer Wake Up Timer Example Closed CaptionMenu Screen Half-screen text Closed Caption cont’dStandard Closed Captions Usually, the volume bar appears when you press the VOLume Volume BarVolume Bar Automatic Operation Features SmartPicture TV Reset FM Radio Switching the Antennas Reminder Reminder Tape in the TV/VCR Index Search Helpful Hints Helpful Hints cont’d Glossary Specifications Model # Serial # Limited WarrantyPlease contact Philips at French Speaking English Speaking Index Supplied Accessories Supplied Accessories