40 Timer Recording With the VCR Plus+ Programming System
Follow the steps below to program a timer recording using the PlusCode programming numbers in your TV guide. Before you begin, make sure:
●The clock is set. If not, CLOCK MUST BE SET appears.
●Channels are programmed.
●There is a tape in the TV/VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program.
●You have completed the steps on pages 38-39.
Complete each step within 60 seconds of completing the previous step. If you don’t, you may return to step 1.
EJECT
|
| POWER |
|
MENU | STATUS | CLEAR | FM |
/EXIT |
1 2 3
4 5 6
7 8 9
2
1 |
| SLEEP/ | ALT.CH |
| WAKE UP | ||
| 0 |
| |
3 | REC | PAUSE | |
/OTR | /STILL | ||
PLAY | |||
Press the COMBI button, then press the VCR | REW | F.FWD | |
PLUS+/ENTER button. | STOP | ||
|
| ||
VCR PLUS+ PROGRAM |
| CH. | VOL. |
|
| MUTE | |
PLUS CODE : – – – – – – – – |
| CABLE | SMART |
|
| ||
|
| /DBS COMBI | PICTURE |
| 1 | SPEED | MEMORY VCR PLUS+ |
TO END PRESS EXIT | F.ADV | SLOW ENTER | |
2 | TRACKING | VAR.SLOW | |
| INDEX | SKIP | |
|
| SEARCH | |
Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record (this number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : 89687 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.
●ONCE: The VCR will record a TV program once,
●DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of time.
●WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.
VCR PLUS+ PROGRAM
>ONCE
DAILY (MON - FRI)
WEEKLY
SELECT ▲▼ CHOOSE B
TO END PRESS EXIT
Helpful Hints
•You cannot set a timer recording if DEFEAT RECORDING is ON. Details are on page 33.
•If CODE ERROR flashes after you enter the PlusCode programming number and press the VCR PLUS+/ENTER button, the number you entered was incorrect (for exam- ple, too short). If this happens, enter the correct number.
•CLASH may flash on the screen after you complete step 2. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not occur.
