Philips CDR800 Installation, Direct digital coaxial connection, Direct digital optical connection

Models: CDR800

1 83
Download 83 pages 59.95 Kb
Page 15
Image 15

xp CDR 800/17.1 eng. 25-07-2001 15:12 Pagina 12

English

Installation

Analog connections

Digital connections

These connections are required for playback and recording via

Direct digital coaxial connection

an amplifier/receiver, equipped with an analog in- and outputs.

This connection is required for direct recording from a digital

 

coaxial source (e.g a CD player, DVD, DAT).

RECORD PLAYER

3

CD PLAYER

 

3

AMPLIFIER/

RECEIVER

1

 

 

 

2

 

 

CD RECORDER

1Connect supplied audio cord between the ANALOG OUT-jacks on the set and the ANALOG input jacks of the amplifier/receiver (TAPE IN, CD-R, AUX or PLAY IN). Insert the red plugs into the R jacks, and the white plugs into the L jacks.

2Connect supplied audio cord between the ANALOG IN- jacks on the set and the analog outputs of the amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT, REC OUT etc.).

Insert the red plugs into the R jacks, and the white plugs into the L jacks.

3Connect all other components of your system (tape deck, CD player, tuner, record player etc.) via their ANALOG OUT-jacks to the appropriate analog input jacks of the amplifier/receiver (CD IN,TUNER IN, AUX IN, PHONO IN etc.).

Any analog device, connected to the amplifier/receiver can now be used as recording source (AUX ANALOG).

CD PLAYER

1

CD RECORDER

1Connect a digital coaxial cord between the DIGITAL IN- jack on the set and the DIGITAL OUT jack of the digital source.

Recording can now be done via the digital coaxial input (AUX DIGITAL).

Direct digital optical connection

This connection is required for direct recording from a digital optical source (e.g. a CD player, DVD, DAT).

CD PLAYER

2

CD RECORDER

1Remove the dust caps from the digital optical connections of both source and CD recorder. Keep the caps in a safe place.

2Connect an optical fibre-optic cord

between the OPTICAL IN jack of the set and the OPTICAL OUT jack of the source.

Make sure you insert both plugs fully, until a click is heard.

Recording can now be done via the digital optical input (AUX OPTICAL).

12

Page 15
Image 15
Philips CDR800 manual Installation, Direct digital coaxial connection, Coaxial source e.g a CD player, DVD, DAT