xp CDR 800/17.1 eng. 25-07-2001 15:12 Pagina 18

Programming

English

Programming track numbers

A program can be composed of tracks in both changer and recorder deck.

Any track can be stored more than once with a maximum of 99 tracks.

If you exceed the maximum of 99 tracks the display shows PROGRAM FULL.

1Load the desired disc(s) in the disc tray(s).

2Select the first required disc by pressing CD 1, CD 2, CD 3, or CDR.

3Press PROGRAM.

PROGRAM starts blinking and PROGRAM is displayed.

4Rotate the ¡ EASY JOG ™ control to select the required tracknumbers on the selected disc and store each track by pressing YES.

For normal Audio CD(RW) discs only:

0If you wish to store all tracks of the selected disc, rotate the ¡ EASY JOG ™ control to select ALL and press YES to store the complete disc in the memory.

The number of programmed tracks (STEP), PROG and the total program time are displayed.

5Select and store all required CD’s and/or tracks in the same way.

6Press PROGRAM to end programming.

PROGRAM stays shown and the program is currently available.

Changing a program

1If necessary press STOP 9.

2Press PROGRAM to enter Program mode.

Erasing tracks

3Select the tracknumbers you wish to erase with 5 or 6 and erase each number by pressing NO.

CLEARED is displayed briefly.

The next programmed track number will move up to this position and is displayed together with the step number and the total program time.

Adding tracks

3Rotate the ¡ EASY JOG ™ control to select the tracknumbers you wish to add to the program and store each track by pressing YES.

The number of programmed tracks (STEP), PROG and the total program time are displayed.

4Press PROGRAM to end programming.

PROGRAM stays shown and the program is currently available.

Clearing a program

1If necessary press STOP 9.

2Press NO.

CLEAR PROG ? is displayed.

3Press YES to clear the program.

PROG CLEARED will be displayed and PROGRAM goes off.

Making a program for recording

If the program is used for recording only tracks from discs in the changer should be programmed. Also see chapter “Recording a program”.

18

Page 21
Image 21
Philips CDR800 manual Programming track numbers, Changing a program, Clearing a program, Making a program for recording