51
EN
This section describes the basic functions available while
watching digital TV or listening to digital radio.For
general menu navigation,see Settings.

Receiver wake up

Your receiver is in “low power”.The only way to wake it
up is to press on the front panel.
Your receiver is in standby.Press P+,P-, or any number
key of the remote control.Alternatively,press yor t
on the front panel.
Your receiver,as any electronic equipment,
consumes power.In order to reduce power
consumption,please switch your receiver to
standbywhenever you are not using it.
For maximum energy saving we recommend you switch
off the receiver byunplugging it from the mains if you
arenot using it for a long time.

Channel selection

Using P+/P- or number keys

Tochange channels,use P+/P- or the number keys of
the remote control.

Previous Channel Recall

Press BACK to move to the previous channel you
watched in the current channel list.

Using the channel list

To view the list of all available channels while watching
digital TV or listening to digital radio,press OK.
If you press BACK,the channel list disappears.
General ViewingFunctions
DCR 2020_indice1 1/09/05 15:26 Page 51