| More about recording |
EN | (VCR or DVD control) |
Connection for Easy Recording | |
| This connection allows automatic recording without requiring you to program your |
| VCR or DVD recorder.You must, however, set a timer on your receiver as described |
| in paragraph Timers. |
| Prior to choosing this connection method: |
| • Consult the user manual of your VCR or DVD recorder to check if and how |
| this feature is supported. Most Philips VCR and DVD recorders support one of |
| the two Easy Recording options. |
| • Check that your TV and VCR or DVD are both fitted with two SCART sockets. |
| • Incorporate your receiver in your existing installation as shown below: |
|
| TV set |
Cable Wall socket | PHILIPS | |
|
| |
| EXT 1 | EXT 2 |
to AC outlet
Cable Receiver
VCR/DVD
IN FROM ANT | EXT 1 |
OUT TO ANT | EXT 2 |
For optimum configuration
-Screw the adapter supplied with your receiver on the “RF IN” socket of the rear panel.
-Connect the receiver “RF IN” socket (with adapter) to the cable wall socket.
-Connect the “RF OUT” socket of your digital receiver to the aerial input socket of your VCR or DVD using the antenna cord type
-Connect the “RF OUT” socket of your VCR or DVD to the aerial input socket of your TV using a RF coaxial lead.
64
