Philips manual DR500 Back Panel

DR500 Back Panel

The back panel of the DR500 has a variety of connectors that are used to link the satellite dish to the DR500 and your audio system to the DR500.

The back panel consists of:

•Power Input  attaches the DR500 to a 120 VAC wall mount supply

•RF IN connector  attaches the DR500 Receiver to your local satellite dish

•Mono Out connector  attaches the DR500 to a monaural receiver or amplifier

•Stereo Out connectors  attaches the DR500 to a stereo receiver or amplifier. Left is coded white; right is coded red.

•Digital Out connector (standard Sony/Philips Digital Interface Format [SPDIF] coaxial output; coded black)  attaches the DR500 to a digital input of audio equipment that has a coaxial digital input.

•Data/Control connector  for PC control and diagnostics

•Serial ID number/bar code label — lists the serial number for this unit

DR500 (E-16)

Rev. C 10/94