Philips DR500 manual DMX/DJ Functions, Setting the Front Panel Lockout

Front Panel Lockout

Setting the Front Panel Lockout

The DR500 allows you to inhibit, or lockout, any command entries. To do this press:

PRESET 9 7 0

The front panel displays LOC indicating that the front panel has been locked. When the front panel has been locked, both the front panel and the remote control will be non-functional. The only command that will be accepted by the DR500 is the command to clear the front panel lockout.

Clearing the Front Panel Lockout

To clear the front panel lockout, press:

PRESET 9 7 0 STORE

The front panel lockout command will be cleared and the DR500 will receive all commands through the front panel and be fully functional again.

DMX/DJ Functions

Checking the DR500’s ID Number

Every DR500 Receiver has a specific identification (ID) number which is located on the back of the DR500. To check the DR500’s ID number using the DMX/DJ, press:

PRESET 1 9 0 VIEW

The ten-digit ID number displays in the following format:

•ID NUMBER 123-4567-890

DR500 (E-38)

Rev. C 10/94