10.2 Smartcard
This screen is used to display information about your smartcard.
10.3 System
This screen is used to display information about your receiver, including the Premiere Serial Number and software version.
10.4 Software Upgrade
10.4.1 Automatic software upgrade notification
While in
10.4.2 Check for new software availability
-Press the red colour key from the System screen described above to launch a search for new software. After a few seconds, the Software Upgrade screen indicates whether new software is available.
-To proceed with the receiver software upgrade, refer to paragraph 11.5.4.2.
10.5 Scan
This screen is used to view the date and results of the last scan performed. It may also be used to launch a new scan.
-Press the green colour key to search for Premiere channels only.
-Alternatively, press the yellow colour key to search for All channels.
The Antenna Configuration screen is displayed, respectively with the Premiere or All channel access filter set on.
- Press <OK> to start scanning.
English
PREMIERE SERVICE MENU 31
