Philips DVDR520H/75 important safety instructions DV Recording Con’t, DV control

RECORDING

DV Recording (Con’t)

Before you start to record DV contents

This unit allows basic DV control on-screen. The on-screen functions are accessed using the DVD recorder remote control.

1.Power on your TV and this DVD recorder.

2.Press the [HDD/DVD] button to set the target

device for the recording.

If “DVD” is set as the target device, press [ OPEN/CLOSE] to open the disc tray and insert a recordable DVD disc with the label side facing up.

3.Connect the DV Cable (IEEE-1394 4-pin to 4-pin cable) to both the DV Camcorder and this DVD recorder.

4.Power on the DV Camcorder. Set “Playback mode” on the DV Camcorder.

5.“Pause” the DV Camcorder at where you want to record.

6.Press [SOURCE] to change the signal-Input source and select “DV.”

7.Resume DV Camcorder playback and press [RECORD] on the DVD Recorder to start recording.

8. To pause recording.

Press [ PAUSE ] on the remote control to pause recording.

Press [ PAUSE ] again, if you want to resume recording.

9. To stop recording.

Press [ ] to stop recording.

DV control

After recording is stopped, a DV control bar will appear on the screen. This allows basic DV control utilizing this DVD recorder’s remote control.

1.Press [t] [u] to select ( ) to fast-forward the DV Camcorder.

2.Press [t] [u] to select ( ) to rewind the DV

Camcorder.

3.Press [t] [u] to select ( ) to stop the DV

Camcorder playing.

4.Press [t] [u] to select ( ) to start the DV

Camcorder playing.

5.Press [t] [u] to select ( ) to pause the DV

Camcorder playing.

Notes:

1.The DV-Link input jack on this unit is for use with DV compatible camcorders only.

2.Only DV signals can be input to the DV-Link jack on this DVD recorder.

3.Do not connect a MICRO MV format video camcorder to this DV-Link (IEEE-1394) jack.

25