Philips DVP3200V/37B user manual Disc Playback

E8A21UD_EN1 5/29/06 3:13 PM Page 18

English	18 Disc Playback
	Before you begin, turn on the TV, Stereo and other equipment
	connected to the DVD/VCR. Make sure the TV and the Stereo (if
	applicable) are set to the correct channel.
	Details are on pages 8-14.
	1 Press y to turn on the DVD/VCR.
	Press DVD so DVD light appears on the front of the
	2 DVD/VCR.
	Press OPEN/CLOSE A on the DVD/VCR to open
	3 the disc tray.
	Place a disc into the tray. If the DVD is recorded on
	only one side, place the disc in the tray with the label facing
	4 up and the shiny side facing down. Some DVDs are
	recorded on both sides. Make sure the label of the side you
	want to play is facing up.
	Press PLAY B to close the tray. The tray will close and
	playback will begin. If playback does not start automatically,
	5 press PLAY B again.
	If a DVD menu appears instead, see page 40.
	To play MP3, Windows MediaTM Audio, JPEG or DivX® files,
	see pages 51-54.
	You also can close the tray by pressing
	OPEN/CLOSE A.
	6 Press STOP C to stop playback.

REMINDER:This DVD/VCR will play only certain discs.

See page 7 for details.

						1
TV/VIDEO	VCR			DVD	VCR Plus+	2
SUBTITLE	AUDIO		ANGLE		ZOOM
DISC/VCR					DVD
MENU					SETUP
			OK			5
BACK
					DISPLAY
REW			PLAY		FFW
PREV	REC	PAUSE		STOP	NEXT	6

3 Press OPEN/CLOSE A

on the DVD/VCR.

4 Insert a disc.

Helpful Hints

•An “X” may appear at the top right corner of the TV screen when you try a feature. Either the feature is not available on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/VCR.

•If a disc is dirty or scratched, the picture may appear distorted or playback may stop. In such cases, remove the disc and turn off the DVD/VCR. Disconnect the power cord, then reconnect it. Clean the disc, then turn on the DVD/VCR again and reinsert the disc for playback.

•If a disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer. This is not a malfunction.

•When the DVD or CD light appears on the display panel, the disc is loaded and ready for playback.

•When you press OPEN/CLOSE A or PLAY B (DVD) on the front of the DVD/VCR when the power is off, the DVD/VCR will turn on in DVD mode. Otherwise, the DVD/VCR will turn on in the mode in which it was turned off.

•If you use PLAY B to close the disc tray, playback starts automatically. If you use OPEN/CLOSE A to close the disc tray, you have to press PLAY B to start playback.