Philips DVP3200V/37B Press K or L until your desired channel number, Appears. Then, press B

E8A21UD_EN1 5/29/06 3:13 PM Page 34

34 Timer Recording with the VCR Plus+ Programming System (cont’d)

English

Instructions continued from the previous page.

5	Press K or L until your desired channel number
	appears. Then, press B.
	● If you are using a standard antenna/Cable TV hookup (as
	shown on page 9), select the channel of the TV program
	you want to record.
	● If you are recording from other equipment, select L1 or L2.
	To determine L1 or L2, refer to the Helpful Hints on page
	28.
	● If you are using a Cable Box/Satellite Receiver, select the
	Cable Box/Satellite Receiver output channel (03 or 04).
	Then, at the Cable Box/Satellite Receiver, select the channel
	you want to record. Leave the Cable Box/Satellite Receiver
	on for the timer recording.
	Details are on page 10.
	● The channel set here will be memorized as the User
	Channel for the station you selected at the Cable
	Box/Satellite Receiver, and saved in the GUIDE CHANNEL
	MAP automatically.			8
	ONE TIME PROGRAM
	PROGRAM NUMBER			1
	DATE		05/07	SUN
	START TIME		07:30	PM
	END	TIME	08:30	PM
	CHANNEL		B16
	REC SPEED		SP	7
			SP
			SLP
	Press K or L until your desired tape speed appears.
	(Example: SP) There are cases in which the program
6 information does not match your area. If the incorrect
	information appears, select the number you want to change
	using s.Then, enter the correct numbers using K or L.
	ONE TIME PROGRAM
	PROGRAM NUMBER			1
	DATE		05/07	SUN
	START TIME		07:30	PM
	END	TIME	08:30	PM
	CHANNEL		16
	REC SPEED		BSP
			SP
			SLP

TV/VIDEO	VCR	DVD	VCR Plus+
SUBTITLE	AUDIO	ANGLE	ZOOM
DISC/VCR			DVD
MENU			SETUP

OK 5,6

BACK

		DISPLAY
REW	PLAY	FFW
PREV	PAUSE	NEXT
REC		STOP
REPEAT		+
	TIMER SET	CH
REPEAT		-
A-B

CLEAR
REC MODE SEARCH	MODE	TITLE

7 Press CLEAR.

8 Press TIMER SET. The DVD/VCR will turn off and “” will appear on the front of the DVD/VCR. In some cases, the DVD/VCR will switch to DVD mode instead.You may use the DVD Player during a timer recording.

If you want to use the VCR until time for the recording, don’t press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won’t be using the VCR anymore (until after the recording).When “” is on, you cannot put the DVD/VCR in VCR mode by pressing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily. Then, you can use the VCR features again.