Display cont’d, Progressive Scan | Philips DVP3200V/37 instruction

E8A21UD_EN2 5/17/06 6:13 PM Page 61

●If you selected STILL MODE, press K or L to select a setting, then press OK. This determines the quality of an image in still mode.

If you select FIELD, still images will be stabilized but coarse due to the small amount of data.

If you select FRAME, the images will be highly defined due to the simultaneous output of two fields.

The default setting is AUTO.

DISPLAY

STILL MODE

AUTO

FIELD

FRAME

OK

STILL MODE

6 Press DVD/SETUP to remove the menu.

You may adjust the Progressive Scan compatibility.

1 Follow the steps 1-4 in the Display setup on page 60.

	Press K or L to select PROG. SCAN, then press OK
	repeatedly to turn PROG. SCAN ON or OFF.
2 Choose ON if your TV has Progressive Scan and if the TV
	is connected to the player’s COMPONENT VIDEO OUT
	jacks. Choose OFF otherwise.
3	The default setting is OFF.
	Press DVD/SETUP to remove the menu.
	● If PROG. SCAN is ON, this message appears:

Press K or L to make a selection, then press OK. If you select NO, the menu disappears and

PROG. SCAN is OFF. If you select YES, this appears:

Confirm again to use progressive scan.

If Picture is good, Select “YES”.

NO

YES

SELECT: K / L SET:OK

Confirm your setting, then press OK. The menu will dis- appear and the Progressive Scan function will be activated. If you do not press any buttons for 15 seconds, Progressive Scan will switch to OFF.

Display (cont’d) 61
				English
TV/VIDEO	VCR	DVD	VCR Plus+
SUBTITLE	AUDIO	ANGLE	ZOOM	6
DISC/VCR			DVD
MENU			SETUP
		OK
BACK
			DISPLAY
REW		PLAY	FFW
REW			FFW
PREV	PAUSE		NEXT

Progressive Scan

TV/VIDEO	VCR	DVD	VCR Plus+
SUBTITLE	AUDIO	ANGLE	ZOOM	3
DISC/VCR			DVD
MENU			SETUP
		OK		2-3
BACK
			DISPLAY
REW		PLAY	FFW
REW			FFW
PREV	PAUSE		NEXT

Helpful Hints

•You can set PROG. SCAN to OFF either in the DISPLAY menu or by pressing and holding PLAY B on the front of the player for more than 5 seconds.

•You can adjust Progressive Scan setting in the QUICK SETUP menu that appears when you first press DVD/SETUP. With QUICK selected, press OK. Press L to select PROG. SCAN. Press OK to choose OFF or ON. Press DVD/SETUP to remove the menu.

Image 61

Philips DVP3200V/37B user manual Display cont’d, Progressive Scan, Jacks. Choose OFF otherwise, Default setting is OFF

Contents

Besoin d’une aide Rapide? Need help fast?Necesita ayuda Inmediata? For Customer Use Proof of Purchase Important Safety Instructions Safety Precautions Safety Information cont’dDeclaration of Conformity Box Table of Contents Introduction Playable Discs and Video Cassettes Determining the best possible connection Hookups Hookups cont’d 1Antenna or Cable TV Signal Connections Signal RF coaxial cableRemember DVD/VCR SignalCable RF coaxial cable TV’s Antenna DVD/VCR Audio OUT jacks on the DVD/VCR and to the red Jack of your DVD/VCRComposite or Baseband video Video OUT jacks on the DVD/VCR and to the Component DVD/VCR to a TV and a Stereo Antenna/Cable TV SignalCheck your Stereo manual for details Back of TV Example only 1Antenna/Cable TV Signal Using the Remote Control Putting Batteries in the Remote ControlRecycling Guidelines/Battery Safety Turn on the TV Repeat this process if the power fails On the DVD/VCR Video Cassette Playback Disc Playback DVD Display Panel Display PanelVCR Display Panel Display Messages Remote Control Front Panel, Rear Panel and Remote ControlFront Panel Rear Panel Press s or B to switch ADD/DELETE Channel SetupAdding/Deleting Channels To scan through only the memorized channels, use CH + or CH Press VCR, then press DISC/VCR Menu so MENU1 Clock VCRWhile the DAY space is flashing, press K or L until While the Year space is flashing, press K or L English Press Clear to remove the menuPress Display again to remove all the displays Recording Prevention Videotape RecordingRemove Cover Tab to prevent Recording Press TV/VIDEO on the DVD/VCR remote control Remote control to return to channel 03 or 04 atPress TV/VIDEO once to put the DVD/VCR in TV To put the DVD/VCR in VCR position. The VCR light Stopping an OTR One-Touch Recording Rerecording Tape Duplication Point the remote control at DVD/VCR 2. PressMake the connections shown above Turn on the TV and set it to channel 03 or 04 Timer Recording On for the timer recording Timer Recording cont’dWhen a timer recording ends Cancelling a Timer Recording before the Recording Starts DVD Be possible only if the DVD is not copy protectedPut the DVD you want to copy in the disc tray Press REC I to start recording. REC will appear on Instructions continue on the next ChannelsBox/DBS output channel for every Guide channel Guide CH User CH Tell the VCR the Guide and User channels by following Instructions from the previousSteps Examine the lists on Press VCR Plus+ Press VCRPress the Number buttons to enter the PlusCode Then, press VCR Plus+ Appears. Then, press B Press K or L until your desired channel numberPress K or L until your desired tape speed appears Press Clear Press Timer SET for the recording Tape Counter Repeat Playback Index Search Time Search Special Effects Playback Automatic Operation Features Understanding Displays Multi-Channel Television Sound/Hi-Fi StereoMulti-Channel Television Sound Hi-Fi Stereo Menus, Playback Control PBC Function Using the Title MenuPlayback Control PBC Function Press K, L, s or B to select an item, then press OK To resume normal playback, press Play B X1.3 and x0.8 Rapid Play with Voice Title/Chapter Search Title/Chapter/Time Search Track Search Paused and Step-by-Step Playback Paused and Step-by-Step Playback, Resume OnResume On Repeat, A-B Repeat To cancel A-B Repeat, press Repeat A-B. OFF willRepeat Let you start over OFF will appear briefly on Screen MarkersElapsed playing time will appear beneath the Markers Display will disappear in about 30 seconds, or press Camera Angles SubtitlesDVD Stereo Sound Mode Audio Language, Stereo Sound ModeAudio Language Zoom Slow MotionPress Pause F during DVD, Video CD or DivX Playback Press Play B to return to normal playback Program Playback Program/Random PlaybackRandom Playback MP3/Windows MediaTM Audio/JPEG Playback When you put a CD-R or CD-RW with MP3To stop playback, press Stop C Folder Playback Dual PlaybackPress DISC/VCR Menu during MP3/JPEG playback Press K or L to select a folder, then press Play B or OK DivX Subtitle DivX PlaybackPress K or L to select the desired group folder or Play B Hint On-Screen Displays Press DVD to put the DVD/VCR in DVD modeDVD Displays Video CD and Audio CD Displays Press Display or Back to remove the display During Windows Media TM Audio playback Initializing Black Level,Virtual SurroundBlack Level Virtual Surround Original Language Language Codes Language cont’dDisc Menu Kinyarwanda Display Select a setting, then press OKPress s or B to select DISPLAY, then Press OK Press K or L to select an item, then press OK Display cont’d Default setting is OFFProgressive Scan Jacks. Choose OFF otherwise Press s or B to select Custom at the top AudioIf you selected DRC, press OK repeatedly to Turn Dynamic Range Control DRC On or Password CHANGE, then press OK While playback is stopped, press DVD/SETUPPress DVD to put the DVD/VCR in DVD mode. DVD Press s or B to select CUSTOM, then press OK Rating Explanations Parental Levels Others Default setting is onPress s or B to select Press DVD/SETUP to remove the menus Default setting is 5 secOthers cont’d Cable Box/Satellite Receiver Output Channel 03 or Glossary Helpful Hints Helpful Hints cont’d Line input mode DVD/VCR ejects the tape when you press REC I or Timer SETCleaning the Video Heads You cannot insert a video cassette Care and Maintenance Philips Limited Warranty ONE 1 Year Limited Warranty Information Index Memo