English
Video Cassette Playback 17
•Other tape playback features are
on pages 36-39.
•If AUTO REPEAT is ON,playback
will begin when you insert a tape,
even when the record tab is
intact. Details are on page 36.
•You must connect the DVD/VCR
to a TV using the RF coaxial
cable or the audio/video cables in
order to use the VCR features.
These hookups are explained on
pages 9 and 12.
Helpful Hints
Read and follow the steps below to play a tape.
1Turn on the TV.Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel. This depends on how you
connected the DVD/VCR to a TV.
Details are on pages 8-14.
2Insert a tape in the cassette compartment of the
DVD/VCR.VCR light will appear on the front of the
DVD/VCR.If the tape’s record tab has been removed,
playback will start automatically.
If the DVD/VCR power is already on,press VCR to put the
DVD/VCR in VCR mode if necessary.VCR light will appear
on the front of the DVD/VCR.
3If playback does not start automatically,press VCR,
then press PLAY B.
4Press STOP Cto stop playback.
5Press REW hto rewind the tape.
6After the tape stops, press STOP/EJECT CA on the
front of the DVD/VCR to remove the tape.
1
2
6Press STOP/EJECT C A
on the DVD/VCR.
Turn on the TV.
Insert a tape in the
DVD/VCR.
3
4
5
TV/VIDEO VCR DVD VCR Plus+
SUBTITLE AUDIO ANGLE ZOOM
DVD
SETUPMENU
DISC/VCR
DISPLAY
TIMER SET
BACK
PLAY
REW FFW
PREV NEXTPAUSE
REC STOP
OK
REPEAT
REPEAT
A-B
CH
+
-
CLEAR
REC MODE SEARCH MODE TITLE
E8A21UD_EN1 5/29/06 3:13 PM Page 17