Philips DVP3200V/37B user manual Be possible only if the DVD is not copy protected, Dvd

E8A21UD_EN1 5/29/06 3:13 PM Page 30

English

30 DVD to Videotape Duplication
Follow the steps below to copy a DVD to a videotape. This will
be possible only if the DVD is not copy protected.
Before you begin:
● Put a videotape in the cassette compartment. Make sure the
	5,6
tape’s record tab is intact and the tape is long enough to record
		TV/VIDEO	VCR	DVD	VCR Plus+
the DVD.
		SUBTITLE	AUDIO	ANGLE	ZOOM
● Put the DVD you want to copy in the disc tray.		DISC/VCR			DVD
● Press VCR so VCR light appears on the front of the DVD/VCR.		MENU			SETUP

● Turn on the TV and set it to channel 3, 4 or its Video Input.

4

1 Point the remote control at the DVD/VCR. Press Number buttons 0, 0, 3. “DISC” will appear on the TV screen.

DISC

BACK

5	REW
	PREV
3,5 REPEAT
	REPEAT
	A-B

OK

DISPLAY

PLAY

FFW

PAUSENEXT

RECSTOP

+

TIMER SET CH

-

6

Press REC MODE repeatedly until the desired tape	1
speed (SP or SLP) appears briefly on the screen.
2 Details about tape speed are on page 67.	2	CLEAR
Press REC I to start recording. “REC” will appear on		REC MODE SEARCH MODE TITLE
3 the display panel.

4 Press DVD. Press PLAY B to play the disc.

5 To pause the recording, press VCR, then press PAUSE k once. “REC” will flash. To resume recording, press REC I or press PAUSE k again. “REC” will reappear.

6 To stop recording, press VCR, then press STOP C.

Helpful Hints

•A timer recording is not possible during DVD to videotape duplication.

•You cannot copy a DVD to a videotape if you are using Progressive Scan. Details are on page 14.